Description
- Ratchet strap assembly meets or exceeds DOT regulations, the North American Cargo Securement Standard, Commercial Vehicle Safety Alliance (CVSA) guidelines, California Highway Patrol (CHP) standards, and Web Sling & Tie Down Association (WSTDA) recommended standards
- Compared to standard webbing, Rhino Webβ’ yields 30% more tensile strength after severe abrasion and is 30% thicker with a tougher surface
- Powder-coated steel flat hook on each end
- Wide handle steel ratchet buckle
- 18″ fixed end length
- Measures 2″ x 30′
- Working Load Limit (WLL) of 3,335 lbs.; break strength of 10,000 lbs.
- Made in the U.S.A.
WARNING: Webbing straps must be protected when used on rough or sharp objects. Straps that are cut, worn, or damaged shall not be used and shall be replaced immediately. All strap assemblies shall be inspected prior to each use. The use of βCheater barsβ or other means of increasing leverage on a ratchet buckle handle or winch, other than a Kinedyne approved device, can cause serious injury to the user and/or bystander. Webbing straps are rated for use in temperature range from +194 degrees F (+90ΛC) to -40 degrees F (-40ΛC).
