Rhino Web™ Heavy-Duty Winch Strap w/Flat Hook – 4″ Wide – 4″ x 30′ (Part # 27988)

Description

• Winch strap assembly meets or exceeds DOT regulations, the North American Cargo Securement Standard, Commercial Vehicle Safety Alliance (CVSA) guidelines, California Highway Patrol (CHP) standards, and Web Sling & Tie Down Association (WSTDA) recommended standards
• Compared to standard webbing, Rhino Web™ yields 30% more tensile strength after severe abrasion and is 30% thicker with a tougher surface
• Powder-coated steel flat hook on one end
• Measures 4″ x 30′
• Working Load Limit (WLL) of 5,400 lbs.; break strength of 16,200 lbs.

WARNING: Webbing straps must be protected when used on rough or sharp objects. Straps that are cut, worn, or damaged shall not be used and shall be replaced immediately. All strap assemblies shall be inspected prior to each use. The use of “Cheater bars” or other means of increasing leverage on a ratchet buckle handle or winch, other than a Kinedyne approved device, can cause serious injury to the user and/or bystander. Webbing straps are rated for use in temperature range from +194 degrees F (+90˚C) to -40 degrees F (-40˚C).