Description
- Flip placard meets DOT placarding specifications of 49 CFR § 172.519 for hazardous materials identification
- Heavy .032" aluminum back plate (painted white) for wind protection
- Fade-resistant acrylic paint
- Stainless steel spring clips to hold panels securely in place
- Aluminum contains 75% post-consumer recycled content
- Complies with ISO 9000 Green Initiative, California Buy Recycled program and EPA Comprehensive Procurement Guidelines (CPG) program
- Choose from standard panel or split panel options
- Standard panel placards available with 0, 2 or 4 clipped corners
- Clipped corners help placards fit in different style roll-up doors and trailers
Back Plate Measurements:
- Split Panel Placards:
- Left to right (corner-to-corner width) β 18.56″ (472mm)
- Top to bottom (corner-to-split height) β 9.28″ (236mm)
- Standard Panel Placards:
- Side to side – 13.75″ (350mm)
- Left to right (corners) – 18.56″ (472mm)
- Top to bottom (corners) – 18.56″ (472mm)
- Standard Panel Placards, 2 Clipped Corners:
- Side to side – 13.75″ (350mm)
- Left to right (corners) – 18.56″ (472mm)
- Top to bottom (corners) – 14.96″ (380mm)
- Standard Panel Placards, 4 Clipped Corners:
- Side to side – 13.75″ (350mm)
- Left to right (corners) – 14.96″ (380mm)
- Top to bottom (corners) – 14.96″ (380mm)
Flip Placard Legends:
- Dangerous
- Class 3 Flammable Liquid
- Class 8 Corrosive
- Division 2.1 Flammable Gas
- Division 4.2 Spontaneously Combustible
- Class 3 Combustible Liquid
- Division 4.1 Flammable Solid
- Division 2.3 Inhalation Hazard
- Blank
- Division 6.1 Inhalation Hazard
- Division 2.2 Non-Flammable Gas
- Class 9 Miscellaneous
- Division 4.3 Dangerous When Wet
- Division 6.1 Poison
- Division 5.1 Oxidizer
- Division 6.1 PG III
